LS Stepper Adapter Harness
Details
The Link LS Stepper Adapter Harness is a plug-and-play adapter designed to connect a GM LS Idle Air Control (IAC) stepper motor to the Link Terminated LS Engine Harness. Required for cable throttle (drive-by-cable) LS applications, it connects directly to the pre-wired stepper connector on the engine harness, simplifying installation and eliminating the need for additional wiring.
Models Supported | GM Gen 3 LS1 and LS6 engines. GM Gen 4 LS2, LS3 and LS7 engines*. Link Terminated LS Engine Harness (PN 101-0300). Cable throttle (drive-by-cable) LS throttle bodies with a factory GM IAC stepper motor. *Gen 4 engines may require additional harness adapters depending on engine configuration. Refer to the LS Harness Manual. |
Warnings | Required when using the Link Terminated LS Engine Harness with a cable throttle LS engine. Not required for drive-by-wire applications. Use the LS DBW Adapter Loom instead (101-0304). Designed exclusively for use with the Link Terminated LS Engine Harness. |
Specifications
Highlights | The Link LS Stepper Adapter Harness has the following specifications: Plug-and-play installation. Supports factory GM LS IAC stepper motors. Connects to the pre-wired stepper adapter connector on the Link LS Engine Harness (PN 101-0300). Interfaces with Aux 5, Aux 6, Aux 7 and Aux 8. Designed for cable throttle (drive-by-cable) LS applications. Manufactured in the USA. |
Product Dimensions | 250mm(L)x25mm(W)x20mm(H) 9.84in(L)x0.98in(W)x0.79in(H) |
Product Weight | 20 grams (0.71 ounces) |
What's in the Box | LS Stepper Adapter Harness |